Open the package and confirm you have everything below before you start the setup.

Salind 11 4G GPS trackerThe device itself, with the SIM already installed inside.

USB-C charging cableFor the first charge and any top-ups later.

Pre-installed M2M SIM cardLives inside the tracker. Non-replaceable — you won't see it.

Have your device ID ready. Activate the device using the device ID printed on the back of the tracker. Have it ready before you start.

Four things to know before you start. Open the protective flap on the side of the tracker to access the charging port and switch.

Protective flapCovers the charging port and on/off switch. Open it gently to reach both.
LED signals (3)Orange (network), blue (GPS), red (battery / charging).
USB-C charging portSits behind the flap. Use the supplied cable only.
On/off slide switch

Weight	300 g (~10.6 oz)
Dimensions	112 × 78 × 27 mm (4.4 × 3.1 × 1.1 inch)
Battery — standby	Up to 70 days
Battery — in operation	~40 days (1 h/day) · ~14 days (6–8 h/day)
Battery type	3.7 V · 7800 mAh Li-ion
Charger	110–220 V AC 50 Hz input · 5 V/2 A DC output
Cold start	3–5 min
Standby start	1–3 min
In-operation start	1–10 sec
GPS chip	AT6558R
GPS accuracy	Up to 5 metres
GPS reception sensitivity	−162 dBm
Operating temperature	−20 °C to +75 °C (−4 °F to +167 °F)
Storage temperature	−30 °C to +80 °C (−22 °F to +176 °F)
Humidity	10 % to 85 %
Water protection	Splash proof — IP65 (per User Manual)
SIM	Pre-installed M2M, non-replaceable
Coverage	100+ countries

Set up your Salind 11 4G.

Three things ship together.